No Power Device Data Recovery London | PCB Repair & BIOS Chip Reprogramming
No Power to the Device – Data Recovery Services in London
Is your hard drive, USB stick, SSD, or laptop showing absolutely no signs of life? Whether it’s completely unresponsive, not detected by your computer, or showing no power LED, our expert team at Creative IT London can help. We specialize in data recovery from devices that fail to power on, with advanced capabilities in circuit board (PCB) repair, chip-level diagnostics, and BIOS chip reprogramming.
Common Causes of Power Failure in Storage Devices
- Burnt or shorted PCB components (resistors, diodes, capacitors)
- Faulty USB or SATA connector ports
- Overvoltage damage from faulty power adapters
- Firmware corruption or unreadable BIOS/ROM data
- Power surge affecting controller chip or power management IC
What We Can Repair
Our engineers carry out deep diagnostics and repairs at component level. In many no-power cases, we can bring the drive or device back to life by resolving hardware faults that prevent it from spinning up or initializing.
- PCB Replacement: If the printed circuit board is beyond repair, we source and replace it with a compatible donor board, carefully matching PCB revision numbers and firmware.
- Component-Level Repair: We test and replace damaged transistors, diodes, TVS suppressors, resistors, and capacitors on the PCB using micro-soldering techniques.
- ROM/BIOS Chip Reprogramming: In many modern hard drives, essential drive calibration data is stored in a small 8-pin BIOS chip (usually Winbond, Macronix, or similar). If this chip becomes corrupted or inaccessible, we extract and rewrite the firmware using a programmer like TL866 or PC-3000. Without this chip, the drive cannot initialize, even with a donor board.
- USB to SATA Conversion: In external drives that use an embedded USB interface, we may bypass the faulty interface by converting it to SATA to access the data directly.
Our No Power Data Recovery Workflow
- Initial Diagnosis: Using multimeters and oscilloscopes, we test voltage rails, fuses, and components for signs of electrical failure.
- Repair or Bypass: If possible, we repair the original PCB; otherwise, we use a donor PCB and reprogram the ROM chip for compatibility.
- Data Imaging: Once powered, we create a forensic image of the drive using PC-3000 or DeepSpar to preserve data integrity.
- File Extraction: Your recovered data is extracted, verified, and transferred to a new medium of your choice.
Pricing Table – No Power Data Recovery
| Service Type | Details | Price (Inc. VAT) |
|---|---|---|
| Diagnostic Evaluation | Full electrical and firmware diagnosis (waived if recovery is approved) | £94.80 |
| PCB/Component Repair | Replacement of faulty board components (e.g., diodes, resistors) | From £270 |
| BIOS Chip Reprogramming | ROM read/write using programmer, typically needed with donor PCB | From £320 |
| Advanced Recovery | Full PCB replacement, firmware correction, or bypass methods | From £540 |
Supported Devices and Brands
- Seagate Barracuda, IronWolf, OneTouch, and Expansion
- Western Digital My Passport, Elements, Black, Blue, Red
- Samsung and Toshiba internal and portable drives
- SanDisk USB and flash memory devices
- External enclosures, NAS units, and RAID systems
Contact Our No Power Recovery Experts
Need to recover critical files from a dead drive? Reach out to Creative IT for expert help:
Phone: 020 7237 6805
Email: support@computerrepairsinlondon.co.uk
Address: Unit 1, 80 Willow Walk, London SE1 5SY
Hours: Monday to Saturday, 9:00 AM – 6:00 PM